Dryer repair cost in Luxembourg (2026)

Typical labour structure:

• Callout base: €60–€90 (transport, first 30 min on-site)
• Hourly rate thereafter: €70–€95/h
• Service call minimum: 1 h charged even if 25 min on-site

Parts handling: Parts are usually a pass-through with a modest margin (10–20 %) — not an upsell. A transparent quote lists the part reference, brand cross-ref and RRP.

A €220 HT standard repair at 17 % TVA invoices at €257 TTC. The repair carries a 24-month warranty on the part and 12 months on labour.

The LU replacement threshold — the price above which a new dryer beats repair — depends on age, technology and fault. For heat-pump dryers in use for 3–6 years, most single faults below €350 are worth repairing. Beyond 8 years or when the diagnosis stacks multiple failures, replacement usually wins.

Decision grid by age and fault cost:

Why the compressor is the pivot decision: A heat-pump compressor sits in a sealed refrigeration circuit. Replacing it requires recovering the refrigerant (typically R290 or R600a on modern LU dryers), brazing the circuit, evacuating to vacuum, and refilling. The operation is specialised (F-Gas certified technician under Regulation EU 517/2014) and the part alone is €180–€260. A new mid-range heat-pump dryer in LU starts at €650 (entry brand) to €1 400 (premium). If the compressor repair is quoted at €380, a 5-year-old premium dryer repair at 27 % of replacement cost is sensible; at 10 years old, replacement is the better call.

The energy-class argument: New 2026 LU heat-pump dryers achieve A+++ energy class (≈180 kWh/year on 160 cycles). A pre-2018 condenser dryer consumes 500–700 kWh/year. Over 5 years of post-repair life, the energy differential on a 120-cycle household is €600–€900 at LU 2026 electricity prices (€0,29/kWh). A €280 repair on a condenser dryer older than 8 years may look like a win on the repair bill but loses €120/year on electricity.

What not to do: Avoid a "cycle-by-cycle" repair where each fault is fixed as it arises on an old unit. This typically accumulates €600–€900 over 3 years on a dryer worth €400 new. Group repairs into a single diagnostic or accept a replacement.

Three technical and regulatory points shape the LU dryer repair invoice: F-Gas certification for heat-pump work, the two-year warranty regime, and TVA at 17 %.

F-Gas certification (Regulation EU 517/2014): Any intervention on a refrigerant circuit in LU requires a Catégorie I F-Gas certificate held by the technician and a corporate F-Gas registration by the repair company. The certificate covers recovery, leak testing, and refilling of fluorinated refrigerants (R134a legacy units) and hydrocarbons (R290, R600a current units). A compressor swap without F-Gas certification is non-compliant; the technician cannot legally vent old refrigerant. If the repair invoice is for compressor work and the company cannot produce a current F-Gas registration number, decline the job.

Warranty regime in LU: Under LU consumer-protection law, white-goods repairs by a declared professional carry:

• 24 months on parts installed (manufacturer warranty pass-through)
• 12 months on labour (declared professional standard)
• 6 months on the invoice total for the same fault (conformity warranty per CC Art. 101)

The technician's customer confirmation should state the warranty window and starting date. If the same fault recurs within 12 months, the labour is free; within 6 months, the entire invoice is free if the same technician is recalled.

TVA at 17 % — no reduced rate: Dryer repair is not on the LU super-reduced schedule. Even in a primary residence renovation bundle, an appliance repair invoice stays at 17 % because the dryer is personal chattel, not fixed real estate. An attempt to invoice at 3 % for a dryer repair bundled into a broader renovation is not compliant with LU VAT rules.

Deductibility for rental landlords: If the dryer is provided as part of a furnished rental, the repair cost is deductible as a maintenance charge against rental income. For a residential furnished-let landlord, the TTC invoice is fully deductible; LU real-estate income reporting captures this.

What should appear on the invoice:

• Company name, Autorisation d'établissement number and F-Gas registration if applicable
• Technician name and certification number
• Appliance details (brand, model, serial number, purchase year if known)
• Fault symptom described
• Diagnostic findings
• Parts replaced with reference numbers
• Labour hours and rate
• Net + TVA + TTC breakdown
• Warranty start date
• Payment terms

A clean end-to-end invoice example:

• Callout diagnostic (deducted): €0
• Part: heating element (ref. 2963600400, brand Miele) = €125 net
• Labour: 1,5 h @ €85/h = €127,50 net
• Subtotal net: €252,50
• TVA 17 %: €42,93
• TTC: €295,43
• Warranty: 24 months on part, 12 months on labour starting 2026-04-23

Dryer repair quotes can swing by 50 % for the same fault because firms interpret the scope differently and their margins on parts vary. The comparison sharpens with a standard briefing.

The six checks:

• Fault identification method. A remote diagnosis by phone and photo is a €0 starting point that many LU pros offer. An in-home diagnostic is €80–€140 with the amount deducted if repair proceeds.
• Part reference disclosed. The quote should list the part number, brand and a public price reference (Miele parts portal, Samsung e-parts, etc.). This eliminates the pricing obscurity.
• Labour time estimated. A heating-element swap on a LU-market Bosch WTH8400 is 1,5 h labour; a motor swap is 2,5 h; a compressor swap is 3,5–4,5 h. A quote that bills 4 h for a heating element is padded.
• Warranty terms stated. 24 months on parts and 12 on labour is the legal minimum; better firms offer 24 on both.
• F-Gas credentials for compressor work. Compulsory. No exceptions.
• Invoice format. Net + TVA + TTC breakdown is compulsory. A single "flat rate" number is non-compliant.

Standard briefing for three quotes:

• Brand, model and serial number (all on the ratings plate, inside the door)
• Purchase year and current age
• Symptom description (does it heat, does it spin, does it show error code, is there a noise, does it finish the cycle)
• Error code if displayed (e.g., Bosch E20, Miele F55, Samsung HE2)
• Usage pattern (cycles per week, typical load)
• Photo of the ratings plate and of any error code display
• TVA position (always 17 % for appliance repair)

Three quotes on this pack land at ±20 %. Wider spreads almost always mean one technician is repairing while another is proposing a part-exchange or bundled service charge. Ask each quote for part reference and labour hours to normalise.

A real-world spread on a broken door switch (symptom: cycle won't start):

• Quote A: €140 TTC — part €55 net, labour 45 min at €80, clean
• Quote B: €225 TTC — part €110 net (double-margin), labour 1,5 h at €90 — padded
• Quote C: €320 TTC — "door module replacement" implying full door hinge (overscoped) — rejected

Payment etiquette:

• Part ordered up front: typically no deposit for < €200 TTC jobs
• Deposit 30 % for compressor or control-board jobs > €350
• Balance on completion
• Cash discount is rare and usually indicates undeclared work — insist on invoice