Price by fan type
Most LU residential fan jobs fall into one of five well-defined types. The price split is most strongly influenced by the wiring work, not the fan itself.
| Fan type | Typical use | LU 2026 install (TTC, labour + small parts) | Product range (TTC) |
|---|---|---|---|
| Bathroom extractor — like-for-like swap | Replace failed extractor | €180–€260 | €60–€180 |
| Bathroom extractor — new install | New ducting + outlet | €280–€420 | €100–€220 |
| Kitchen extractor / cooker hood (separate from cooker hood) | Wall vent through to outside | €280–€420 | €80–€180 |
| Ceiling fan — replace existing fixture | Existing ceiling rose, suitable load | €230–€340 | €150–€480 |
| Ceiling fan — new install with junction box | New box + reinforcement + switch | €380–€525 | €150–€480 |
| Attic / loft ventilator | Roof or gable mounting | €350–€620 | €120–€260 |
| Whole-house mechanical ventilation (VMC simple flux) | New duct system + central unit | €2 600–€5 800 | included |
| Whole-house VMC double flux (heat-recovery) | New duct system + HRV unit | €7 500–€18 500 | included |
Cost stack — typical bathroom extractor new install:
- Mark out and cut a 100 mm or 125 mm hole through outside wall — 1 hour
- Run a 100 mm or 125 mm flexible duct — 30 to 60 minutes
- Install through-wall outlet grille with insect mesh — 20 minutes
- Wire in a humidistat-timer extractor (Vortice, Aldes, Renson, Helios) — 30 to 60 minutes
- Connect to existing lighting circuit or new spur — 30 to 90 minutes
- Patch and paint the wall around the cut — included or separate
- Test and certify the install — 15 minutes
- Net total labour: 3 to 5 hours at €60 to €80 net hourly rate
- Product: humidistat extractor €100–€220 retail, plus duct €18, grille €25, cable and switch €18
Hidden cost drivers:
- Existing ceiling rose at the wrong place for a ceiling fan — relocating the box adds €80–€140
- Bathroom on the upper floor with no direct outside wall — the duct must reach to a soffit or roof outlet, adding €80–€150 of pipe and labour
- Concrete ceiling in a 1970s/1980s LU apartment — drilling for a fan-rated junction box requires SDS drilling and adds €60–€120
- Asbestos test if pre-1990 ceiling material is suspect — €100–€180 for a single sample
- Replastering and painting after a new switch or socket position — usually a separate trade at €60–€120
Bathroom extractor specs that matter for LU:
- IP44 minimum in zone 1; IP65 above shower
- Airflow rate: 60 m³/h minimum for shower-only bathroom; 90 m³/h for full bathroom; 120+ m³/h for large family bathroom
- Humidistat-timer (humidity sensor + 5 to 30 min run-on) is the LU standard in 2026 — non-humidistat models save €30 but are now uncommon
- Duct length: every metre of duct beyond 3 m reduces effective airflow by ~10 %; insist on the right grade
Ceiling-fan specs:
- DC-motor ceiling fans use 60–70 % less energy than AC and run far quieter
- Modern fans must have a remote or hardwired 3-speed control — the cheapest pull-cord models are increasingly rare in LU
- Ceiling-rose load capacity: a 25 kg fan needs a fan-rated brace box (not a generic plastic ceiling box)
The cheap-quote signal:
- A €120 "ceiling fan install" is almost always ignoring the ceiling brace and fishing the wire through an unsuitable box. The professional floor in LU is €230 because of declared labour, certified parts and the IP/zone test that must be issued.
LU electrical regulation, declared labour and certification
Electrical work in Luxembourg is governed by the Norme NF C 15-100 (mostly applied identically) and the LU national wiring regulations (Règlement grand-ducal). Two systems intersect: the formal wiring rules and the labour-declaration framework.
Operator and labour rules:
- Any commercial electrical installation must be performed by an electrician with Autorisation d'établissement under "électricien" (Chambre des Métiers)
- Each working electrician must be employed and declared (CCSS) or registered as an indépendant
- ITM (Inspection du Travail et des Mines) carries out occasional checks on declared work
- A neighbour or DIY householder cannot legally install a fan circuit and have it certified for resale
Certification and inspection:
- New installs in homes built or significantly renovated since 1995 must be certified by an approved organism (Luxcontrol, SOCOTEC, Apragaz) for the global installation
- Single-fan additions on an existing certified circuit do not generally require fresh global certification, but the electrician issues a written confirmation of the work
- Sale of the property — the property compliance certificate (rapport de conformité) is checked at notary stage
Bathroom-zone rules (NF C 15-100 reference):
- Zone 0 — inside the bath/shower tray — fittings must be 12 V SELV, IPX7
- Zone 1 — directly above bath/shower up to 2.25 m — IPX4 minimum, 230 V allowed for fixed fittings only
- Zone 2 — adjacent to zone 1, 60 cm horizontally — IPX4 minimum
- Zone 3 — outside zone 2 — standard fittings allowed
- An extractor fan in a bathroom is typically zone 1 or 2 — IP44 (= IPX4) is the minimum, IP65 advised above shower
Ceiling-fan electrical considerations:
- Ceiling fans typically draw 30–80 W on AC, 18–50 W on DC — modest current load
- Existing lighting circuit (10 A) is normally sufficient
- A new dedicated 16 A circuit is rarely needed for a single fan unless the lighting circuit is heavily loaded
- DC-motor fans need a specific compatible wall control — never use a standard rotary dimmer (will burn the fan or cause humming)
Switch and control choices:
- Single on/off — €15–€30 product line, basic function
- 3-speed wall control — €30–€55, hardwired
- Variable wall control + light dimmer — €55–€110
- Remote with handheld + wall — €30–€80 add-on, very popular in 2026 LU installs
- KNX or smart integration — €120–€280 add-on for whole-home automation
Common red flags from undeclared work:
- Cables that don't match LU colour code (live/neutral/earth swap)
- Junction boxes not screw-fixed and IP-rated
- No earth on the fan when LU code requires it
- No certificate/written record of the work
- Cash-only with no warranty
The 5-year warranty regime:
- LU electrician work is covered by a 10-year structural warranty (garantie décennale) when integrated to a building, plus a 2-year working warranty on the appliance itself
- Cash work has none of this — a fan that smokes 8 months after install at €100 cash means a fresh €350 install with a new electrician
The ITM check:
- Hiring an undeclared electrician for any home installation can result in fines of €500–€2 500 against the householder under ITM rules
- The cost saving against declared work is rarely worth this exposure
- Always check Autorisation d'établissement and ask for an invoice with TVA line on declared work
TVA, primary residence and the renovation framing
A fan installation in Luxembourg attracts TVA at 17 % by default. The 3 % super-réduit (super-reduced) rate applies in narrow circumstances and meaningfully changes the all-in cost on a renovation project.
TVA practice:
- Standalone fan install in any property — TVA 17 %
- Fan install bundled into a renovation of a primary residence over 10 years — eligible for TVA 3 % super-réduit if the renovation framing is clear (one full quote covering the renovation, ITM-compliant declared labour, and the property qualifying)
- Fan install in a rental property owned by a landlord — TVA 17 % (rental properties do not qualify for 3 %)
- Fan install in a commercial property — TVA 17 %, recoverable for VAT-registered businesses
The 3 % rule conditions in summary:
- Property is the owner-occupier's primary residence (résidence principale, registered with the commune)
- Property is more than 10 years old
- Renovation cost cap of €50 000 (HT) per dwelling and per period (with refresh on a 10-year cycle)
- Application made via the Administration de l'enregistrement, des domaines et de la TVA before or during the works
- All work declared via Autorisation d'établissement holders, no cash labour
Why the 3 % rate matters for a fan job:
- A €420 TTC standalone fan install at 17 % = €359 HT + €61 TVA
- Same job at 3 % = €359 HT + €11 TVA = €370 TTC — a saving of €50 on a small fan install
- Bundle a fan install with a bathroom renovation (e.g. new tiles, new bath, new lighting) over €5 000 HT and the saving on the package is several hundreds of euros
The administration step (often missed):
- The owner files the application before or during the works — most LU electricians know how to handle this for renovation packages, but for a standalone fan job, the household often has to claim the rate themselves
- The electrician issues a TVA-3 % invoice once the application is approved
- Without the application approval, the electrician charges 17 % by default
Tax-deductibility for individuals:
- A fan install on a primary residence is not directly deductible as personal expense
- A fan install on a rental property is fully deductible against rental income for landlords (with TVA 17 % paid)
Tax-deductibility for businesses:
- Fans installed in commercial premises (offices, shops, restaurants) are deductible as operating expense and the TVA is recoverable in full for VAT-registered businesses
The takeaway:
- For a standalone fan job, expect TVA 17 %
- For a renovation including the fan, ask the electrician early about TVA 3 % framing — the savings can pay for the next install or upgrade
- Never accept "TVA 0 %" pricing — that is undeclared work, illegal in LU, and exposes the household to ITM fines
The contractor invoicing red flags:
- An invoice with no TVA line at all = undeclared
- An invoice that splits "matériel" (with TVA) and "main-d'œuvre" (without TVA) — illegal practice in LU
- A "discount for cash payment" of €30–€50 — typically the electrician's saving on social charges, with risk passed to the household
Choosing the right fan and the noise question
Two LU households at the same price point may be deeply happy or deeply unhappy with their fan after 12 months. The variable is rarely the price — it is the spec match to the room.
Bathroom-extractor key specs:
- Airflow rate (m³/h) — match to room size: 60 m³/h for under 8 m², 90 for 8–14 m², 120+ for 14+ m². Aim for 8–10 air changes per hour for a wet room
- Noise level (dB(A)) — DC-motor models in 2026 sit at 18–28 dB(A) at the standard speed; AC-motor models at 32–42 dB(A). Above 35 dB(A), it sounds like running water at low volume — disturbing in a small bathroom
- Humidistat-timer — the absolute LU 2026 standard; €30–€50 over a basic timer-only model, fully worth it
- IP rating — IP44 minimum in zone 1, IP65 above shower (see regulation section)
- Connection diameter — 100 mm or 125 mm; matches the duct already in place or selected
- Brand reliability — Vortice (Italy), Helios (Germany), Renson (Belgium), Aldes (France) and Soler & Palau (Spain) lead the LU market in 2026; cheaper unknown brands have higher failure rates and worse spare-parts availability after year 3
Ceiling-fan key specs:
- Diameter (cm) — match to room size: 90–100 cm for 8–12 m², 120–135 cm for 12–20 m², 140+ cm for 20+ m²
- Motor type — DC quieter, more energy-efficient, longer-lasting; AC cheaper upfront but louder
- Number of blades — modern high-performance is 3 narrow blades, traditional look is 4–5 wider blades
- Noise — DC fans 22–32 dB(A) at high speed; AC fans 35–48 dB(A); choose for bedroom and living areas accordingly
- Light kit — integrated LED is the LU 2026 norm; warm white 2 700–3 000 K for living area; 4 000 K for kitchen
- Reverse function — winter mode pushes warm air down from the ceiling; useful in high-ceilinged LU stone houses
- Smart integration — KNX, Zigbee, Wi-Fi options; check compatibility with your existing system
The match between fan and room:
- A 120 cm fan in a 5 m² bathroom is wrong — the airflow is excessive and the noise is amplified by the small space
- A 90 cm fan in a 30 m² living room is wrong — under-powered, will run on max constantly
- The right match is energy-efficient and quiet — a wrong match is loud and ineffective
Why DC fans cost more but win for LU:
- LU energy prices (2026: €0,28–€0,32 per kWh residential) make AC fans expensive in operation
- A 60 W AC fan run 12 hours/day for 5 months/year = 60 × 12 × 150 × 0.30 = €32/year
- A 25 W DC equivalent = €13/year — a saving of €19/year, paying back the price difference in 3–4 years
- DC fans last 18–22 years vs 8–12 years for AC — total cost of ownership wins
The brand reliability question:
- Vortice and Helios bathextractors carry 5-year warranty in 2026; cheaper imports often only 1 or 2 years
- Ceiling-fan brands Casafan, Hunter, Aireryder and Lba carry 5–10 year warranties on motors
- A €60 cheap unbranded fan typically dies in year 3 — replacement plus install means €60 + €230 = €290; you would have done better with a €220 branded fan plus warranty
How to compare three fan-installation quotes
Three quotes for the same fan job can spread by 50–80 % because each electrician specifies different parts, different switch positions, and includes patch-and-paint or not. Aligning the brief takes 10 minutes once you know what you want.
The five anchor points:
- Fan brand and model named in writing (not "appropriate fan supplied")
- Switch and control type (single, 3-speed, dimmer + remote)
- Wiring path — existing circuit reused, new spur, or new dedicated circuit from the consumer unit
- Disposal of old fan — included or extra
- All-in TTC price including patching, paint touch-up, and certification line
The brief to hand each electrician:
- Property type (apartment, terraced, detached) and year built
- Room (bathroom, kitchen, living, bedroom, attic) with dimensions
- Existing wiring — is there a working ceiling rose / extractor outlet at the right place?
- Bathroom: where is the shower head and bath edge — for IP zone planning
- Switch desired (location and type)
- Brand preference if any (or open with €X budget for product)
Pre-award contractor checks:
- Autorisation d'établissement number under "électricien"
- Chambre des Métiers registration
- RC pro insurance certificate (€2M+ standard)
- Two recent client references in the same commune
- IP zone certificate procedure for bathroom installs
Reading the spread:
- ±15 % on a clean brief — normal
- 30–50 % spread — usually different fan brand/spec or different switch type
- 50–80 % spread — usually one bidder includes new circuit + patching while another only quotes "drop-in" labour without finish work
Two common omissions:
- Patch-and-paint after switch retrofit — €60–€120 if not in headline
- Disposal of old fan — usually €20–€40, often unlisted
The certificate and warranty question:
- Ask "what certificate or written confirmation do I get with the install, and what's the warranty?" — a serious electrician issues an attestation de conformité or written confirmation referencing the regulations checked, plus the standard 10-year décennale + 2-year product warranty
- A vague "trust me" answer means cash work without paperwork
The future-proofing question:
- For a ceiling fan: ask if the wiring will support a smart control (KNX, Zigbee) added later — the cost of a 2-wire vs 4-wire run is small now and substantial as a retrofit
- For a bathroom extractor: ask if the duct supports a higher-airflow upgrade later — sizing the duct for the next size up costs €15–€25 today and saves €150–€220 in the future
The product-supply choice:
- Electrician supplies the fan — usually 10–25 % markup, but full warranty pass-through and accountability for fit
- Customer supplies the fan — saves the markup, but the electrician's warranty does not extend to the product, only to the install
- For known LU brands (Vortice, Helios, Casafan), customer-supply is fine; for unknown imports, let the electrician supply
A clean fan-install quote names fan model, switch type, wiring path, certificate, all-in TTC and warranty. If it is "200 € pose ventilateur, je m'occupe de tout", you are buying surprises and probable cash-only work.
A fan installation in Luxembourg costs €250 to €525 TTC in 2026 for the typical residential job, with the cheap end covering a like-for-like extractor swap and the top covering a full ceiling-fan install with new circuit, ceiling reinforcement, and 3-speed wall control. The price is set by the fan type, the wiring work, and the switch chosen — the fan itself is rarely the cost driver. Insist on declared work with Autorisation d'établissement under électricien, an IP-zone certificate for bathroom installs, an attestation de conformité or written confirmation of the wiring, and the standard 10-year structural warranty + 2-year product warranty. TVA at 17 % applies by default; bundling the install into a renovation of a primary residence over 10 years can unlock TVA 3 % super-réduit. Choose DC-motor fans for noise and energy efficiency. Fynd.lu lists declared LU electricians with insurance, certifications and pricing on file — request three quotes on the same brief before signing.
