Price by appliance — dishwasher, washing machine, oven, fridge
| Appliance | Price (incl. TVA 17 %) |
|---|---|
| Dishwasher — freestanding, existing connections | €160–€220 |
| Dishwasher — integrated, with door panel | €220–€320 |
| Washing machine — freestanding | €160–€220 |
| Washer-dryer stacked column | €240–€320 |
| Electric hob — induction or ceramic, new circuit ready | €180–€260 |
| Gas hob — includes commissioning certificate | €260–€360 |
| Built-in oven — single | €220–€300 |
| Built-in oven — double, with microwave column | €300–€400 |
| Extractor hood — ducted to exterior | €260–€380 |
| American-style fridge with water line | €240–€340 |
| Microwave — integrated, ventilated | €180–€260 |
Prices above assume the supply points (electricity, water, drain) are in the correct location. Moving a socket, running a new drain or adding a hot-water feed is separate trade work at €80–€160/hr.
Format drivers:
- Freestanding versus integrated: an integrated appliance is almost always 30 to 50 % more expensive because the cabinetry trim and the door panel have to align with the rest of the kitchen
- New-build versus retrofit: in a new kitchen all the access is open, labour is 40 to 80 minutes per appliance; retrofit into an existing kitchen with furniture in the way adds 20 to 40 minutes per unit
- Height and access: flats on floors 3 and above without a lift add a €40–€80 carrying fee for washer-dryers and American-style fridges
Cost drivers — what moves a quote from €160 to €400
The gap between a €160 and a €400 appliance installation is not about markup — it reflects real differences in time, parts and liability. A clear quote names each driver.
The six drivers that matter:
- Integration level. Freestanding units are plug-and-play once in position; integrated units demand template drilling into the cabinet, hinge alignment of the decorative panel and often the removal of adjacent drawers — a 30 to 60 minute step.
- Connection type. A washing machine needs cold water, drain and a 16 A socket — all common. An induction hob needs a 32 A dedicated circuit that frequently is not present in older flats, pushing the job toward a separate electrician line of €250–€500.
- Old appliance disposal. Most installers offer take-away at €30–€80. Sparkaasse-managed buildings and several communes run a free bulky-waste collection on request, so pickup is optional rather than mandatory.
- Kitchen material. Cutting through solid wood or laminated board is routine; granite or quartz worktops require a stone cutter subcontractor and add €150–€300 per cut.
- Gas qualification. Any gas work — connection, commissioning, pressure test — must be performed by an installer with a Luxembourg gas qualification. The premium over a pure-electric quote is typically €60–€120.
- Warranty documentation. Proper appliance registration requires the installer to fill the manufacturer form and provide a commissioning sheet. A cash installer who skips this voids the manufacturer warranty.
What a standard installation quote includes and what it does not
A written installation quote separates labour, parts and disposal. The presence of these three lines is the first signal of a declared provider.
Included in a typical flat quote (€180–€320):
- Delivery to the room of installation (ground floor, lift present)
- Unpacking and disposal of packaging materials
- Positioning, levelling and anti-vibration adjustment
- Connection to existing water, drain, electricity or gas points
- Commissioning test — run cycle, leak check, flame test for gas
- Written handover sheet listing the model, serial number and commissioning date
- Six-month installation workmanship warranty
Usually excluded — expect a separate line:
- Carrying up stairs beyond the second floor — €40–€80
- Removal and disposal of the old appliance — €30–€80
- New electrical circuit or socket — €150–€300 on an electrician line
- Drain or water-supply extension — €150–€400 on a plumbing line
- Cabinetry cutting for a different appliance depth — €80–€200
- Extended warranty beyond the six-month workmanship cover
Red flags in a quote:
- Flat fee "all-in" without stating what the utility points are assumed to be
- No mention of a gas certificate when a gas appliance is in scope — illegal in Luxembourg
- Cash-only pricing without an invoice — unwinds the two-year statutory warranty on the installation itself
- Installer refusing to fill the manufacturer registration form — the appliance warranty risk lands on you
Declared labour, TVA 17 % and the 3 % super-reduced rate
Appliance installation in Luxembourg is a service that must be billed with TVA at 17 % when quoted on its own. When the installation is part of a qualifying renovation on a principal residence — replacing a kitchen as part of a wider refit — it can fall under the 3 % taux super-réduit via the logement.lu mechanism.
The rule in practice:
- Standalone installation — TVA 17 %
- Installation invoiced by the kitchen supplier as part of a full kitchen refit on a principal residence — potentially TVA 3 %
- Installation in a rental property or second home — TVA 17 %, the super-reduced rate does not apply
What a compliant invoice must show:
- Installer's TVA number and Autorisation d'établissement reference
- Labour line and parts line separated
- TVA line explicit at 17 % (or 3 % where applicable)
- Brand, model and serial number of each installed appliance
- Gas commissioning certificate annex where gas work was part of the scope
Rate comparison on a typical €280 net kitchen-appliance package:
| Setup | TVA | All-in |
|---|---|---|
| Standalone multi-appliance installation | 17 % | €327.60 |
| On a principal-residence kitchen renovation invoice | 3 % | €288.40 |
The €39.20 gap on a small job is modest, but on a €6 000 full kitchen-appliance fit-out the 17 %-versus-3 % gap reaches nearly €840 — worth coordinating at briefing stage.
Why declared labour matters beyond TVA:
- Two-year statutory warranty on the installation itself
- Insurance coverage if a water leak damages the floor below
- Manufacturer warranty preserved via the written commissioning sheet
Electric versus gas — connection rules in Luxembourg
The split between electric and gas appliances drives both the price and the legal framework. A gas installation in Luxembourg is regulated, certified and insured differently from an electric one.
Electric-appliance installation:
- Any installer with an Autorisation d'établissement covering appliance installation can perform the work
- A dedicated 16 A or 32 A circuit may be required — verify the existing circuit labelling in the fuse panel
- Standard 230 V single-phase covers most appliances; 400 V three-phase is needed for some cookers and high-power washer-dryers
- No commissioning certificate required beyond the written invoice and serial-number record
Gas-appliance installation (hob, oven):
- Must be performed by an installer with a Luxembourg gas qualification
- Requires a pressure test and a written commissioning certificate at delivery
- Natural gas connection in Luxembourg-Ville, Esch-sur-Alzette and other urban communes uses pre-installed Creos supply points; LPG via a bottle is the alternative in rural communes
- Landlord buildings may require the property syndic to approve the appliance-model choice before commissioning
Induction as the default modern choice:
- Luxembourg's electricity mix is over 70 % renewable under the current Klimabonus framework, so the carbon profile of a new induction hob is favourable
- Induction requires a 32 A dedicated circuit — budget €200–€500 extra if the kitchen was wired for gas only
- Induction cookware must be ferrous — aluminium and copper pans need replacement or an adapter disc
When gas still makes sense:
- Existing gas line in a period property where running a new 32 A circuit would mean wall-chasing
- Chef households preferring flame control — subjective but valid
- Backup cooking during power outages — rare in Luxembourg but a real driver in some rural communes
How to compare three installation quotes
Three quotes on the same appliance can land between €180 and €320. The gap is rarely margin — it is assumption about utility points, disposal, travel and commissioning.
The six checks that matter:
- Utility-point assumption. Each quote must state whether existing water, drain, electricity and gas points are assumed correct or whether rework is priced. A silent quote is a budget risk.
- Disposal line. One quote including old-appliance disposal and another excluding it introduces a €30–€80 invisible delta.
- Travel and access. Floor, lift availability and parking are factored differently. A first-floor flat with lift is standard; a fourth-floor flat without lift adds €40–€80.
- Commissioning and warranty. Gas installations must include a written commissioning certificate. An electric installation should list the six-month workmanship warranty.
- TVA rate. Standalone job at 17 % versus integrated-renovation invoice at 3 % — clarify at briefing, not at invoicing.
- Installer qualification. Gas work requires a gas-qualified installer; a general handyman cannot legally touch gas regardless of price.
A clean briefing pack to send all three:
- Brand, model and dimensions of the new appliance
- Photo of the installation location, showing existing utility points
- Floor number, lift availability, parking situation
- Old-appliance disposal preference (yes/no)
- Target installation date window
Three installers quoting from the same pack typically land within ±15 % on standalone jobs and ±25 % when a gas-qualified installer competes with an electric-only trade. Wider spreads trace back to one of the six checks above.
Multi-appliance jobs — where the savings really come from
Installing four appliances in a new kitchen is rarely four times the price of installing one. The shared setup cost and the rolled-up travel line produce a real discount — but the discount is not unlimited.
Where the savings come from:
- One travel charge covers the whole appointment — a €40–€60 line charged once
- Setup on site (laying protection, preparing tools, safety briefing) runs once not four times — saves 30 to 45 minutes of labour
- Shared testing — the installer commissions several appliances in one sequence, verifying the electrical panel and water isolation only once
- Bulk disposal — one van-load removal of old appliances and packaging rather than four
Typical four-appliance kitchen package (dishwasher, oven, hob, extractor):
| Scope | Single-appliance billing | Bundle billing | Saving |
|---|---|---|---|
| Dishwasher (integrated) | €240 | — | — |
| Oven (built-in) | €260 | — | — |
| Induction hob (electric) | €220 | — | — |
| Extractor hood (ducted) | €300 | — | — |
| Sub-total (single) | €1 020 | — | — |
| Bundle total | — | €820 | €200 (20 %) |
Where the savings run out:
- Cabinetry and stone work are not shared — each cut is priced individually
- Gas commissioning is an individual test per appliance, not a shared step
- New-circuit work (32 A socket for induction, dedicated oven line) is still billed per circuit at €150–€300 each
Practical sequencing for a new kitchen:
- Electrician first — set the circuits, pull cable, install sockets
- Plumber second — set water and drain for dishwasher and refrigerator
- Carpenter third — final cabinetry and cut-outs
- Appliance installer last — everything ready, the 820-€ bundle becomes achievable
Retailer-provided installation versus independent installer
Most large retailers in Luxembourg — Electro-Center, Cactus, Saturn, Media Markt — offer paid installation alongside the appliance. The service is convenient but not always the best value compared with an independent installer on the same job.
Retailer installation — what you get:
- Booking tied to the appliance delivery date
- Flat price, published up front
- Retailer takes responsibility for damage in transit and during installation
- Disposal of old appliance bundled at €30–€50, sometimes free on promotion
- Two-year statutory warranty on the installation since the retailer invoices
Retailer installation — limits:
- Limited to the appliance category the retailer sells — no gas installation at electronics-only retailers
- Often subcontracted to local installers at a retailer-margin, so the final installer is anonymous until delivery day
- Complex jobs (new circuit, cabinetry trim, access above floor 3) are usually refused or priced as an uplift at €80–€150
Independent installer — what you get:
- Choice of installer qualified for your specific job (gas, electric, integrated)
- Flexible scheduling — evening and weekend appointments possible
- Willingness to handle complex scope (new 32 A circuit, stone cutting, multi-trade coordination)
- Direct relationship — the installer on site is the installer who quoted
Independent installer — limits:
- No built-in coordination with appliance delivery; the homeowner takes delivery, then calls the installer
- Self-responsibility on the model choice — the installer will decline to install a unit that does not fit without charging a call-out fee
- Parts supply is on the homeowner — the installer typically does not carry appliance spares
Decision rule:
- Single appliance on existing points, no complications — retailer, usually cheaper
- Integrated multi-appliance kitchen refit — independent, better coordination
- Gas commissioning — independent with gas qualification, always
- Listed building or atypical access — independent, retailer usually refuses
Appliance installation in Luxembourg is a mature flat-fee market in 2026: €160 to €360 per appliance, with the spread driven by integration level, utility-point readiness and gas qualification. A declared invoice at 17 % TVA buys you the two-year statutory warranty on the installation, a commissioning sheet that preserves the manufacturer warranty, and insurance coverage on water damage. Multi-appliance jobs save around 20 % through shared setup, travel and testing. Fynd.lu lists installers with Autorisation d'établissement, gas qualifications where relevant, and written warranty policies — request two quotes on identical scope before choosing.
